After two seconds, release the power and volume up button, but keep pressing the volume down button.Then press and hold the Power, Volume Up, and Down button together.You now have to connect your Rockchip chipset device to the PC.Once that is done, you should see the following sections getting populated- Firmware Version, Firmware Time, Support Chip, Boot Version, and Boot-Time.Please navigate to the IMG firmware file and load it onto the tool.Then right next to the FW path field, you will see a button with three dots.Launch the tool by double-clicking on the RKBatrchTool.exe file.Now that the necessary drivers are installed, it’s time to load the firmware file to the Rockchip Batch Flash Tool.STEP 2: Load Firmware IMG file to Rockchip Batch Flash Tool The installation process will now begin, and it should be completed within a few minutes.Select the Android Bootloader Interface and click the Next button.There you will find the android_winusb file, select it and click on OK. Then click on Browse and navigate to the downloaded USB driver’s folder.Click on the Have Disk button situated at the bottom.Next up, select Show all devices and hit the Next button.On the other hand, the newer Android devices should select the Let me pick from a list of device drivers on my computer.Then click on the Browse button and if you have an older device, click on the Browse button and select the entire USB drivers folder.In the next popup that appears, select Browse my Computer for Updated Driver software.
Scroll to the Other Devices section, and your device should be mentioned as Unknown or Other Device.Then connect your device to PC and search for Device manager from the Start menu.So download the drivers for your device from the above-linked post. To begin with, you will have to install the USB drivers for your device.The instructions will be given in a step-by-step manner for ease of understanding. Flashing Firmware via Rockchip Batch Flash Tool
0 kommentar(er)
